Ideal for Small Systems: Shunyata Gemini Model-4 Power Distributor Functions as Two-in-One Power Conditioner and Ground-Noise Reduction Hub, Includes Venom HC Cable
A two-in-one power conditioner and ground-noise reduction hub that for a limited time comes with a 15A Venom HC power cable, the Shunyata Gemini Model-4 is ideal for small high-end systems, headphone setups, and network closets. Capable of powering 200-watt amplifiers in spite of measuring just 4.77 x 12.25 x 5.88 inches, this mighty mini leverages Shunyata’s proven NIC noise isolation chamber technology to provide a common grounding point for the components to which it’s connected — as well as beneficial noise suppression rated at 24dB from input-to-output.
Designed and constructed using trademarked Dynamic Transient Current Delivery (DTCD) analysis, Gemini Model-4 dramatically improves low-frequency performance, dynamic contrasts, and sonic clarity. The presence of a Component-to-Component (CCI) filter further enhances what you’ll hear in that it addresses the noise generated by your electronic components. A Chassis Grounding System (CGS) that lessens ground plane noise and minimizes inter-component voltage differences between component chassis, a dual 12-guage ArNi VTX buss wiring system, and a hydraulic electromagnetic breather that uses low-impedance relays and a sensing coil without limiting current add to the benefits that make Gemini Model-4 stand out from the pack.
Equipped with two isolation zones and four NEMA5-20R outlets, Gemini Model-4 is finished off with internal vibration-dampening panels and Shunyata’s isolation footers. Operating without hum, buzz, or heat, and requiring no ventilation, Gemini Model-4 is backed by a limited lifetime warranty and more than two decades of Shunyata’s proven, award-winning engineering expertise.
Want to know more about Gemini Model-4 or how it differs from the company’s other power conditioners? Call a Music Direct audio consultant today and we’ll happily find the Shunyata product right for your system(s).
Maximum Voltage: 90-125 VAC r.m.s. unregulated
Input Current Ratings: Maximum Continuous Current: 20A
Output Current Ratings: Max Current/Outlet: 15A
Maximum Transient Protection: 40,000 A @ 8/50 μs
Over-Current Protection: Hydraulic Electromagnetic Breaker
Wiring System: Dual 12-gauge ArNi VTX Buss System
Ratings: 600 V 105° C
Noise Suppression:
Input to Output (100 kHz – 30 MHz): > 24 dB reduction
Zone to Zone (100 kHz – 30 MHz): > 26 dB reduction
Inlet: IEC C15
Outlets: 4 NEMA5-20R
Isolation Zones: 2 zones
Vibration Control:
Vibration dampening panels (internal)
Shunyata Vibration Dampening Footers
Construction:
Aluminum and steel chassis
Anodized, aluminum faceplate
Dimensions (WDH): 12.25" x 5.88" x 4.77"
Weight: 6.6 lbs.