Set Yourself Up for the Future with the NAD C 379 Hybrid Digital DAC Amplifier: Features 80Wpc Output, SABRE ES9028, Built-In Phonostage, Versatile Connectivity, and Two MDC Slots for Expansion
NAD didn’t invent the phrase “future-proof,” but when it comes to designing integrated amplifiers that meet that definition, such as the C 379 HybridDigital DAC amp, the company might as well own the patent. Built around a robust engine that delivers 80Wpc of trademarked HybridDigital UcD output and an ESS SABRE ES9028 DAC that supports up to 32-bit/284kHz performance, the 19.1-pound C 379 plays with supremely low distortion, captures rich detail, and provides spectacular dynamics. Since its free from clock jitter common to most digitally based units, C 379 also offers levels of accuracy and soundstaging associated with equipment that belongs to a different (and higher) price class.
When it comes to being prepared for future advances in technology, C 379 throws down with two MDC2 slots that allow you the opportunity to update its capabilities without having to buy an entirely different amplifier. Second-generation MDC invites you to add technologies such as Dirac Live, BluOS, AirPlay 2, aptX HD Bluetooth, and more — such as the ability to connect to a home network via WiFi or Ethernet for 24-bit/192kHz wireless multi-room playback. Exceptional versatility is also already on-board courtesy of connectivity that includes HDMI eARC; an MM phonostage with RIAA equalization; two subwoofer outputs; a separate, high-level headphone amplifier; and an array of optical and coaxial inputs.
Measuring 3.9 x 17. 1 x 15.4 inches (HWD), C 379 outputs more than 120Wpc of instantaneous power (four ohms) for short-term transients and, for more versatility and power, can be bridged in mono mode with the NAD C 268 to supply up to 300Wpc of pure, clean continuous power. Housed in a sleek chassis and graced with elegant, simple looks, C 379 is ready for practically any system — dedicated high-end music or an entertainment setup featuring stereo and your TV.
For more information on this high-value, highly capable unit, reach out to a Music Direct audio consultant at 312-433-0200.
• Customised HybridDigital UcD Amplifier with Stereo and Bridge Modes
• 2 x 80 Watts per channel of Continuous Power (8 and 4 Ohms)
• 2 x 120 Watts per channel of Dynamic Power (4 Ohms)
• Bridgeable for up to 300 Watts per channel of Continuous Power
• Industry-leading ESS SABRE™ 32-bit/384kHz DAC
• Dual MDC 2 Slots for Future Upgrades and Expanded Features
• MM Phono Stage with Accurate RIAA Equalization and Ultra-Low Noise
• Built-in Separate Headphone Amplifier for Low and High Impedance
• HDMI eARC, Optical Digital and Coax Digital Inputs
• Dual Subwoofer Outputs
- PREAMPLIFIER SECTION
- LINE INPUT, PRE-OUT (ANALOG BYPASS ON)
- THD (20Hz - 20kHz): <0.002 % at 2 V out
- Signal-to-Noise Ratio: >106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
- Channel separation: >100dB (1 kHz); >90 dB (10 kHz)
- Input Impedance (R and C): 56 kohms + 100 pF
- Maximum input signal: >4.6 Vrms (ref. 0.1 % THD)
- Output impedance: Source Z + 320 ohms
- Input sensitivity: 65mV (ref. 500 mV out, Volume maximum)
- Frequency response: ±0.3 dB (20 Hz – 20 kHz)
- Maximum voltage output -IHF load: >>5 V (ref. 0.1 % THD)
- PHONO INPUT, PRE-OUT (ANALOG BYPASS ON)
- THD (20Hz - 20kHz): <0.01% at 2 V out
- Signal-to-Noise Ratio: >84dB (200 ohms source; A-weighted, ref. 500 mV out)
- Input sensitivity: 46 kohms/100 pF
- Frequency response: ±0.3 dB (20 Hz – 20 kHz)
- Maximum input signal at 1kHz: >80 mVrms (ref. 0.1 % THD)
- LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON)
- THD (20Hz - 20kHz): <0.005% at 1V out
- Signal-to-Noise Ratio: >107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
- Frequency response: ±0.3 dB (20 Hz – 20 kHz)
- Channel separation: >62 dB at 1kHz
- Output impedance: 2.2 Ohms
- LINE IN, SPEAKER OUT (ANALOG BYPASS ON)
- Continuous output power into 8 ohms and 4 ohms: 2 x 80W
- THD (20 Hz – 20 kHz): <0.03 % (250 mW to 80 W, 8 Ohms and 4 Ohms)
- Signal-to-Noise Ratio: >95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
- Clipping power: 150W
- IHF dynamic power: 120W into 8 ohms, 200W into 4 ohms, 250W into 2 ohms
- Peak output current: >26A (in 1 ohm, 1ms)
- Damping factor: >100 (ref. 8 ohms 20 Hz – 20 kHz)
- Frequency response: ±0.3 dB (20 Hz – 20 kHz)
- Channel separation: >90dB (1 kHz), >75dB (10 kHz)
- Input sensitivity (for 80 W in 8 ohms): 750mV/50kohms
- GENERAL SPECIFICATIONS
- Supports bit rate/sample rate: up to 32 bit/384 kHz
- Frequency band: 2.402GHz- 2.480GHz
- Maximum transmit power (dBm): 7 dBm ± 2 dBm
- DIMENSIONS AND WEIGHT
- Gross dimensions (W x H x D): 435 x 100 x 390mm (17.1 x 3.9 x 15.4")
- Net Weight: 8.7kg (19.1lb)
- Shipping weight: ~11kg (24.2lb)
