Marry the Golden Age of the Past to the Higher-Performing Vinyl Promise of the Present: Music Hall Classic Turntable Features Uni-Pivot Tonearm, Cartridge, and More
Look at the belt-driven Music Hall Classic turntable dead-on from eye level, and you'll see a refined analog instrument defined by a dark-walnut wood-veneer base so alluring, its finish seemingly belongs in America's finest steakhouses. View it from above, and you'll notice the uni-pivot tonearm, factory-mounted Music Hall Spirit Cartridge, touch-sensitive electronic speed control for 33/45RPM, aluminum platter, felt mat, and super-accurate lines for the counterweight.
But while Classic proves a looker, its practical fortitude comes alive when spinning LPs, a process it makes even easier with automatic lift and shut-off functionality and quiet, detailed, ultra-stable playback. You can also opt to use its built-in bypassable phono preamplifier as well. A powerful DC motor, adjustable damping feet, removable head shell, and dust cover round out an instrument that weds the golden age of the past to the higher-performing vinyl promise of the present. 100% Satisfaction Guaranteed.
"[You'll need to probably spend three times as much on a pre-configured table to make upgrading over the Classic truly worth it."
– Andrew Robinson, Home Theater Review, four-star review
"At $649 and as plug'n'play as a 'table can be, the Classic is a must-audition. It's a delight to use, and its included Music Hall Spirit cartridge extracts maximum information from the groove."
– Thom Moon, SoundStage! Access
- • Factory-mounted Music Hall Spirit moving magnet
- cartridge on removable head shell
- • Switchable built-in phono preamp
- • Aluminum platter with felt mat
- • Tonearm automatically lifts and platter stops spinning
- at the end of a side
- • Medium-density fiberboard (MDF) base with adjustable
- vibration-damping feet
- • Dark walnut wood veneer
- • Electronic speed control (33-1/3 and 45 rpm)
- • Dimensions: 17-1/8"W x 6-1/4"H (with dust cover
- down) x 14-1/2"D
- • Weight: 15.2 lbs.
Motor: DC motor
Driving method: belt drive
Turntable platter: 305mm dia. aluminum die-cast
Speeds: 33 1/3 and 45 rpm
Wow and flutter:
Typical: less than 0.12% WTD at 3KHz RMS(CD-4005)
Limit: Less than 0.15% WTD at 3KHz RMS(CD-4005)
S/N ratio:
Typical: More than 65dB (DIN-B) (SS-4242)
Limit: More than 62dB (DIN-B) (SS-4242)
Speed tolerance: 3000Hz +/-3%(CD-4005)
Power supply: DC12V, 2.0A universal power supply
Dimensions (WDH): 17.1" x 14.5" x 6.2"
Weight: 15.2 lbs.
User Manual (PDF, 709 KB)